LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System With Traction Control System - DELPHI Db 7 >> Diagnosis & Testing >> Clearing Diagnostic Trouble Codes

Clearing Diagnostic Trouble Codes

NOTE: DTCs cannot be cleared by disconnecting EBCM, disconnecting negative battery cable, or by turning ignition off. DTCs can only be cleared by using a scan tool. DTCs will be erased when ignition is cycled 100 times without fault reappearing. The ignition cycle counter in EBCM will be reset to zero.
  1. Connect scan tool. Before clearing DTCs, check and note current DTC data. Select ABS/TCS function. Select DTC(S) function and then CLEAR CODES function.
  2. Verify DTCs are cleared. If other DTCs are displayed, either DTCs were not cleared or ABS/TCS fault still exists. Diagnose fault and repeat procedure.
scientia non olet · About LEMON Manuals