LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Column & Steering Column Switches >> Removal & Installation >> Steering Column >> Removal ("C", "K", "L", "M", "S" & "T" Series)

Removal ("C", "K", "L", "M", "S" & "T" Series)

  1. Disconnect negative battery cable. Remove air bag module (if equipped). See appropriate AIR BAG RESTRAINT SYSTEMS article. Remove steering column trim panels. On models with column shift, disconnect transmission control cable. On all models, remove steering wheel. See STEERING WHEEL .
  2. Disconnect steering column harness connectors. Remove nut and bolt from upper to lower shaft connection. Remove upper and lower steering column support nuts. Remove steering column, rotating column to allow shift lever to clear instrument panel opening, if necessary.
scientia non olet · About LEMON Manuals