LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Column >> Removal & Installation >> Intermediate Shaft >> Removal (1-Piece)

Removal (1-Piece)

  1. Set wheels in straight-ahead position. Install Steering Column Anti-Rotation Pin (J-42640) into steering column lower access hole, (if equipped). Position intermediate steering shaft seal in order to provide access to intermediate steering shaft lower bolt, (if equipped). Remove shield from steering gear, (if equipped).
  2. Mark relationship of intermediate shaft components in order to assure proper installation. Remove steering shaft lower bolt from steering gear stub shaft. Remove left knee bolster, (if equipped). Reposition steering shaft seal and remove upper bolt. Disconnect intermediate steering shaft from steering column. Remove intermediate shaft.
scientia non olet · About LEMON Manuals