LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 2.0L DOHC 4-Cylinder >> Removal & Installation >> Timing Chain Housing (Front Cover) >> Removal

Timing Chain Housing (Front Cover): Removal

  1. Disconnect negative battery cable. On 4WD models, remove front axle assembly. See DIFFERENTIALS & AXLE SHAFTS - TRACKER article in DRIVE AXLES. On all models, remove steering gear. Drain engine oil. Remove oil pan. See OIL PAN . Drain cooling system. Remove cooling fan and shroud. Remove both serpentine belts and belt tensioners. Remove serpentine accessory belt idler pulley.
  2. Remove water pump pulley. Remove bypass hose and by-pass pipe brackets from cylinder head. Remove crankshaft bolt and pulley. Remove A/C compressor bolts, and position compressor with refrigerant lines aside. Remove A/C compressor bracket.
  3. Remove valve cover. Remove timing chain housing bolts, and remove timing chain housing.
scientia non olet · About LEMON Manuals