LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 2.0L DOHC 4-Cylinder >> Removal & Installation >> Camshafts >> Inspection

Removal & Installation: Camshafts: Inspection

  1. Inspect camshaft lobe height, journal diameter and runout. Replace camshaft if not within specifications. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
  2. Measure cylinder head camshaft bore and camshaft journal diameter. Replace camshaft(s) or cylinder head if oil clearance is not within specification. If camshaft(s) and cylinder head exceed specification, replace component with greatest difference to specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals