LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Disc Brake Pads >> Removal & Installation

Removal & Installation

  1. Raise and support vehicle. Remove wheel. Compress caliper piston with large "C" clamp. Remove caliper guide pin bolts. Hold inner disc pad while removing caliper from knuckle. Support caliper using wire. Remove inner and outer disc pad, pad clips and springs. See Fig 1 .
  2. To install, reverse removal procedure. Coat slide bushings with silicone grease. Tighten caliper guide pin bolts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Exploded View Of Front Disc Brake Caliper
G91G01979Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals