LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Camber & Caster Adjustment >> "C"& "K" Old Style & "G" Series (Caster Adjustment )

"C"& "K" Old Style & "G" Series (Caster Adjustment )

  1. Check frame angle. See "C" & "K" OLD STYLE & "G" SERIES (FRAME ANGLE)  . If corrected caster is not within specification, remove frame bracket slots. See "C" & "K" OLD STYLE & "G" SERIES (FRAME BRACKET SLOT REMOVAL)  . Reset caster by loosening nut on end of each cam bolt securing upper control arm to frame brackets. See Figure .
  2. Rotate cam bolts until caster is within specification. See WHEEL ALIGNMENT SPECIFICATIONS  table. Tighten nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals