LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel And Steering Column - Standard >> Repair Instructions >> Steering Column Seal Replacement - On Vehicle >> Removal Procedure

Removal Procedure

    Fig 1: Steering Column Seal
    GM362507Courtesy of GENERAL MOTORS COMPANY
  1. Set the front wheels in the straight-ahead position.
  2. Set the steering wheel in the LOCK position.
  3. Remove the intermediate shaft. Refer to Upper Intermediate Steering Shaft Replacement .
  4. Remove the nuts from the studs.
  5. Remove the seal from the vehicle.
scientia non olet · About LEMON Manuals