LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel And Steering Column - Standard >> Repair Instructions >> Shift Lever Replacement - On Vehicle (Without Tow/Haul Switch) >> Installation Procedure

Installation Procedure

    Fig 1: Seal And TORX(R) Head Shift Lever Screw (Without Tow/Haul Switch)
    GM362445Courtesy of GENERAL MOTORS COMPANY
  1. Install the shift lever (1).
  2. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the TORX® head screw (2).

    Tighten 

    Tighten the screw to 1.5 N.m (13 lb in).

  3. Roll the seal over the TORX® head screw (2).
scientia non olet · About LEMON Manuals