LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Instrument Cluster >> Removal

Instrument Cluster: Removal

NOTE: Ignition switch must be in LOCK position when removing instrument cluster assembly.
  1. Remove instrument panel cluster trim panel. See INSTRUMENT CLUSTER TRIM PANEL - STANDARD COLUMN  or INSTRUMENT CLUSTER TRIM PANEL - TILT COLUMN  .
  2. Remove 3 screws which secure instrument cluster assembly.
  3. Disconnect 4 electrical harness connectors (2) from cluster assembly (1). See Fig 1 .
  4. Remove cluster assembly (1) from instrument panel assembly. See Fig 1 .
Fig 1: Removing Instrument Cluster Harness Connectors
G00054278Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals