LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Instrument Cluster Printed Circuit >> Removal

Instrument Cluster Printed Circuit: Removal

  1. If vehicle is not a base model, go to next step. If vehicle is a base model, go to step  6 .
  2. Remove speedometer (2). See SPEEDOMETER/ODOMETER  and Figure .
  3. Remove engine tachometer (1). See TACHOMETER  .
  4. Remove fuel gauge (3). See FUEL GAUGE  .
  5. Remove engine coolant temperature gauge (4). See TEMPERATURE GAUGE  . After removing temperature gauge, go to step  8 .
  6. Remove speedometer (2). See SPEEDOMETER/ODOMETER  and Figure .
  7. Remove fuel and temperature combination gauge (1). See FUEL/TEMPERATURE COMBINATION GAUGE  and Figure .
  8. Remove all instrument cluster bulb sockets from cluster case.
  9. Remove bulbs from sockets, as necessary.
  10. Remove electronic brake control indicator lamp and instrument cluster bulb check relays from instrument cluster case.
scientia non olet · About LEMON Manuals