LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Hazard Flasher Switch >> Removal

Hazard Flasher Switch: Removal

  1. Using a taped flat-blade tool, gently pry and release 3 clips around hazard warning switch trim panel.
  2. Disconnect hazard warning switch electrical harness connector.
  3. Depress tab on each side of hazard switch.
  4. Remove switch from hazard warning switch trim panel.
scientia non olet · About LEMON Manuals