LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Hazard Flasher Switch >> Installation

Hazard Flasher Switch: Installation

  1. Install hazard warning switch to hazard warning switch trim panel. Ensure retaining tabs are fully engaged.
  2. Connect hazard warning switch electrical harness connector.
  3. Install hazard warning switch trim panel into instrument panel.
  4. Ensure retaining clips are fully engaged.
scientia non olet · About LEMON Manuals