Fuel/Temperature Combination Gauge (Base Model): Removal

NOTE: Do not remove needle from fuel or temperature gauge. There are no detents or flat spot on shafts in order to indicate correct placement.

1. Remove instrument cluster retainer. See INSTRUMENT CLUSTER BEZEL  .
2. Remove 6 screws (2) which secure fuel and temperature gauge to instrument cluster case. See Fig 1 .
3. Remove fuel and temperature gauge (1) from instrument cluster case. See Fig 2 .

Fig 1: Identifying Instrument Cluster Fuel/Temperature Gauge Screws

Courtesy of GENERAL MOTORS CORP.

Fig 2: Identifying Instrument Cluster Combination Gauges (Base Model)

Courtesy of GENERAL MOTORS CORP.