2-3 Shift Solenoid Valve: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

Remove the case side cover. See CASE SIDE COVER . Disconnect the transaxle wiring harness. Using a small screwdriver or pick, remove the 2-3 shift solenoid valve retainer (314C) from the control valve body (301). See Fig 1 . Remove the 2-3 shift solenoid valve (315B) from the control valve body (301).

Fig 1: Exploded View Of 2-3 Shift Solenoid Valve Components

Courtesy of GENERAL MOTORS CORP.