LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> Transaxle Internal Wiring Harness >> Removal

Transaxle Internal Wiring Harness: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2001 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the case side cover. See appropriate AUTOMATIC article in TRANSMISSION SERVICING.
  2. Use a small flat-bladed tool to remove the wiring harness from the solenoid valve(s), TFP manual valve position switch and/or the temperature sensor.
  3. Remove the wiring harness.
scientia non olet · About LEMON Manuals