LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> Park/Neutral Position Switch >> Removal

Park/Neutral Position Switch: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2001 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Block the wheels.
  3. Place the vehicle is the Neutral position.
  4. Remove the air cleaner intake duct.
  5. Remove the range selector cable from the PNP switch.
  6. Disconnect the PNP switch electrical connectors. See Figure .
  7. Remove the range selector lever nut.
  8. Remove the range selector lever.
  9. Remove the PNP switch bolts. See Figure .
  10. Remove the PNP switch.