LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> 2-3 Shift Solenoid Valve >> Removal

2-3 Shift Solenoid Valve: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2001 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the case side cover. See appropriate AUTOMATIC article in TRANSMISSION SERVICING.
  2. Disconnect the transaxle wiring harness.
  3. Using a small screwdriver or pick, remove the 2-3 shift solenoid valve retainer (314C) from the control valve body (301). See Figure .
  4. Remove the 2-3 shift solenoid valve (315B) from the control valve body (301).
  5. Remove the "O" ring seal (316) from the 2-3 shift solenoid valve (315B) ONLY if it is damaged.
scientia non olet · About LEMON Manuals