LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> 2-3 Shift Solenoid Valve >> Installation

2-3 Shift Solenoid Valve: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2001 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new "O" ring seal (316) onto the 2-3 shift solenoid valve (315B), if it was removed. See Fig 1 .
  2. Install the 2-3 shift solenoid valve (315B) into the control valve body (301).
  3. Install the 2-3 shift solenoid valve retainer (314C) into the control valve body (301).
  4. Connect the transaxle wiring harness.
  5. Install the case side cover. See appropriate AUTOMATIC article in TRANSMISSION SERVICING.
Fig 1: Exploded View Of 2-3 Shift Solenoid Valve Components
G00073403Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals