LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> 1-2 Shift Solenoid Valve >> Installation

1-2 Shift Solenoid Valve: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2001 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new "O" ring seal (316) onto the 1-2 shift solenoid valve (315A), if it was removed. See Fig 1 .
  2. Install the 1-2 shift solenoid valve (315A).
  3. Connect the transaxle wiring harness.
  4. Hold the 1-2 shift solenoid valve (315A) in the control valve body (301). Install the 1-2 shift solenoid valve retainer (314D) into the control valve body (301).
  5. Install the case side cover. See appropriate AUTOMATIC article in TRANSMISSION SERVICING.
Fig 1: Exploded View Of 1-2 Shift Solenoid Valve Components
G00073402Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals