LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Folding) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat back bolsters. Refer to Seat Back Bolster Replacement - Rear Split Folding .
  2. Install the seat back latch striker. Refer to Seat Back Latch Striker Replacement - Rear Folding .
  3. Install the fold down seat backs on the seat back frame.
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear (Non-Folding)  or Seat Back Replacement - Rear (Folding) .
    Fig 1: Installing Rear Seat Back Bolsters
    G01833275Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals