LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Filler Neck Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the washer solvent container filler neck to the washer solvent container, pressing in until fully seated.
  2. Install the washer solvent container filler neck push-in retainer.
  3. Close the hood.
    Fig 1: Installing Washer Solvent Container Filler Neck & Push-In-Retainer
    G01830675Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals