Up/Down or In/Out Adjustment
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
Important: The door side upper and lower hinge bolts must remain tight enough to retain door adjusted position
- Loosen the door side upper (2) and lower hinge bolts. Do not remove the bolts.
- Adjust the door up or down by repositioning the door as needed.
- Adjust the door in or out by repositioning the door as needed.NOTE: Refer to FASTENER NOTICE .
- Tighten the door side upper (2) and lower hinge bolts.
Tighten
Tighten the bolts to 33 N.m (24 lb ft).