Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Rear Spindle Rod to Knuckle Nut | 150 N.m | 110 lb ft |
| Rear Suspension Strut Shaft Nut | 75 N.m | 55 lb ft |
| Rear Suspension Support Mounting Bolts | 110 N.m | 81 lb ft |
| Rear Wheel Hub to Knuckle Bolts | 75 N.m | 55 lb ft |
| Rear Wheel Spindle Rod to Rear Suspension Support Nut | 140 N.m | 103 lb ft |
| Stabilizer Shaft Insulator Bracket Bolts | 48 N.m | 35 lb ft |
| Stabilizer Shaft Link Nuts | 35 N.m | 26 lb ft |
| Strut Mount to Body Nuts | 41 N.m | 30 lb ft |
| Strut to Knuckle Nuts | 122 N.m | 90 lb ft |
| Trailing Arm Bracket to Body Nut | 54 N.m | 40 lb ft |
| Trailing Arm to Knuckle Bolt | 70 N.m + 65 Degrees | 52 lb ft + 65 Degrees |