LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Trip Odometer and Reset Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) cluster trim plate screws.
  2. Remove the steering column filler panel. Refer to Steering Column Filler Replacement .
  3. Pull the I/P cluster trim plate rearward to disengage the retainers.
  4. Disconnect the electrical connector from the trip odometer and reset switch.
  5. Release the retainers on the trip odometer and reset switch by using a small flat-bladed tool.
  6. Remove the trip odometer and reset switch from the instrument panel cluster trim plate.
    Fig 1: Removing Trip Odometer Switch, Reset Switch, Electrical Connectors & Screws
    G01830840Courtesy of GENERAL MOTORS CORP.