LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Trim Plate Replacement - IP Accessory >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console .
  2. Pull the instrument panel (IP) accessory trim plate away from the IP trim pad.
  3. Disconnect the IP harness seat heater leads, if equipped.
  4. Remove the seat heater switches from the IP accessory trim plate, if equipped.
  5. Remove the IP accessory trim plate.
    Fig 1: Removing IP Accessory Trim Plate
    G01830868Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals