LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Trim Panel Replacement - IP Cluster >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the trip odometer and reset switch to the instrument panel cluster trim plate. Refer to Trip Odometer and Reset Switch Replacement .
  2. Align the instrument panel cluster trim plate to the instrument panel retainers.
  3. Install the instrument panel cluster trim plate.

    Press into place until fully seated.

    NOTE: Refer to FASTENER NOTICE .
  4. 4. Install the screws to the instrument panel cluster trim plate.

    Tighten 

    Tighten the instrument panel cluster trim plate bolts to 2 N.m (18 lb in).

  5. Install the Steering Column Filler Panel. Refer to Steering Column Filler Replacement .
    Fig 1: Installing IP Panel Cluster Trim Plate & Screws
    G01830875Courtesy of GENERAL MOTORS CORP.