LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel steering column opening filler. Refer to Steering Column Filler Replacement .
  2. Remove bolts from the Data Link Connector.
  3. Remove the hood release lever. Refer to HOOD LATCH RELEASE HANDLE REPLACEMENT .
  4. Remove SIR connector clip.
  5. Remove the bolts from the knee bolster bracket.
    Fig 1: Removing Bolts From Knee Bolster Bracket
    G01830864Courtesy of GENERAL MOTORS CORP.
  6. Remove the instrument panel knee bolster bracket from the instrument panel.
    Fig 2: Removing Knee Bolster Bracket From IP
    G01830865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals