LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The ignition switch must be in the OFF position when removing the instrument panel cluster.
  1. Remove the instrument panel cluster trim plate. Refer to Trim Panel Replacement - IP Cluster .
  2. Remove the screws from the instrument panel cluster.
    Fig 1: Removing Instrument Panel Cluster Trim Plate & Screws
    G01830906Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the instrument panel cluster.
  4. Remove the instrument panel cluster from the instrument panel.
    Fig 2: Removing Instrument Panel Cluster & Electrical Connector
    G01830907Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals