LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the instrument panel cluster.
    Fig 1: Installing Electrical Connector To Instrument Panel Cluster
    G01830908Courtesy of GENERAL MOTORS CORP.
  2. Install the instrument panel cluster to the instrument panel.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the screws to instrument panel cluster.

    Tighten 

    Tighten the instrument panel cluster bolts to 2 N.m (18 lb in).

  4. Install the instrument panel cluster trim plate. Refer to Trim Panel Replacement - IP Cluster .
    Fig 2: Installing Instrument Panel Cluster Trim Plate & Screws
    G01830909Courtesy of GENERAL MOTORS CORP.