LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel (IP) Outer Trim Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the tabs on the instrument panel end cap to slots in instrument panel retainers.
  2. Install end cap by pressing into the retainers until fully seated.
    Fig 1: Installing IP End Cap
    G01830877Courtesy of GENERAL MOTORS CORP.