LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Hood Release Lever Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Steering column filler panel. Refer to Steering Column Filler Replacement .
  2. Remove the bolts/screws from the hood release handle base.
    Fig 1: Removing Bolts From Hood Release Handle Base
    G01830860Courtesy of GENERAL MOTORS CORP.
  3. Remove the hood release cable from the hood release handle.
  4. Remove the hood release handle from the instrument panel.
    Fig 2: Removing Hood Release Cable From Hood Release Handle
    G01830861Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals