LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Hazard Warning and Cruise Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the hazard warning and cruise control switch bezel to the instrument panel.
    Fig 1: Installing Hazard Warning & Cruise Control Switch Bezel To (I/P)
    G01830838Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors to the hazard warning and cruise control switch.
  3. Press the hazard warning and cruise control switch into the retainer. The switches will snap into position.
  4. Install the center air deflector. Refer to Deflector Replacement - Instrument Panel Air .
    Fig 2: Installing Hazard Warning Switch, Cruise Control Switch & Electrical Connectors
    G01830839Courtesy of GENERAL MOTORS CORP.