Air Temperature Actuator: Removal
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
Remove the I/P steering column opening filler by unsnapping the retainers from the I/P. See Figure. Remove bolts from the Data Link Connector. Remove the hood release lever. Remove SIR connector clip. Remove the left Instrument Panel (I/P) insulator. Remove the bolts from the knee bolster bracket. See Figure. Remove the instrument panel knee bolster bracket from the instrument panel. Disconnect the electrical connector from the air temperature actuator. Remove the mounting screws from the air temperature actuator. See Figure. Remove the air temperature actuator.