LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (HVAC Systems - Automatic) >> Removal & Installation >> Vacuum Control Assembly >> Installation

Vacuum Control Assembly: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the tab to the slot in the HVAC module case, then push up to seat the control solenoid. Install the mounting screws which secure the vacuum control assembly.
  2. Connect the vacuum harness connector to the vacuum control assembly. Connect the electrical connector to the vacuum control assembly. Install the right side I/P insulator.
scientia non olet · About LEMON Manuals