LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (HVAC Systems - Automatic) >> Removal & Installation >> Temperature Actuators >> Installation (Right)

Installation (Right)

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the right air temperature actuator, then align the slots in the electric actuator driver to the flats on the temperature shaft. Install the screws to the right air temperature actuator.
  2. Connect the electrical connector to the right air temperature actuator. Install the I/P compartment. Install the right side I/P insulator. Recalibrate the actuator.
scientia non olet · About LEMON Manuals