LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (HVAC Systems - Automatic) >> Removal & Installation >> RECIRCULATION Actuator >> Removal

RECIRCULATION Actuator: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right Instrument Panel (I/P) insulator. Remove the I/P compartment. Disconnect the vacuum line from the recirculation actuator.
  2. Lift to release the recirculation actuator retaining tab and slide off mounting bracket. See Fig 1. Disconnect the vacuum actuator plunger rod from the recirculation lever and remove the recirculation actuator.
Fig 1: Removing & Installing Recirculation Actuator
G00192059Courtesy of GENERAL MOTORS CORP.