Defroster Actuator: Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the defroster actuator to the defroster door arm and snap into place on the HVAC module. Connect the vacuum line to the actuator. See Fig 1.
- Remove the hand vacuum pump and reinstall the vacuum line to the recirculation actuator. Reposition the relay pack. Install the relay pack bolts.
- Install the rear I/P compartment cover to the I/P. Install the screws and push pin to the rear I/P compartment cover. Install the I/P compartment. Install the right I/P insulator.