VF Display

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

When you start the vehicle, the display will show the current fan speed, mode and driver side set temperature for a few seconds and then show the outside air temperature. After a set temperature change is made, the new set temperature reading will be displayed for a few seconds and then go back to outside air temperature. To view the set temperature, press the left temperature switch and the VF display will show the set temperature for a few seconds. When the HVAC control module is off, only the ambient air temperature will be displayed.

When the HVAC system is in full automatic mode, the word AUTO will appear on the display. If you have selected a manual fan speed, then the fan symbol will appear on the display. If a manual mode has been selected, the corresponding mode symbol will appear on the display.