Transaxle Mount Bracket: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle.
Remove the left front tire and wheel.
Remove the left engine splash shield.
Use floor stands to support the transaxle.
Remove the transaxle bracket-to-transaxle mount upper nuts. See Fig 1 .
Remove the transaxle bracket-to-transaxle bolts. See Fig 2 .
Remove the transaxle bracket.

Fig 1: Removing/Installing Transaxle Bracket-To-Transaxle Mount
Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing/Installing Transaxle Bracket-To-Transaxle Bolts
Courtesy of GENERAL MOTORS CO.