Activating System
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
Ensure ignition is off and key is removed. Connect driver-side air bag module Yellow 2-pin connector, located at base of steering column and install Connector Position Assurance (CPA) clip. See Figure. Connect passenger-side air bag module Yellow 2-pin connector, located to right of steering column and install CPA clip. See Figure. Reinstall driver-side knee bolster. Install AIR BAG fuse and instrument panel end cover. Check system for proper operation. See SYSTEM OPERATION CHECK .