LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Air Bag Restraint Systems) >> Removal & Installation >> Steering Wheel >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove driver-side air bag module. See AIR BAG MODULES . Scribe mark on steering shaft and steering wheel to ensure proper alignment during installation. Remove steering wheel nut. Using Steering Wheel Puller (J-1859-03), remove steering wheel. Ensure SIR coil wiring is not damaged when removing steering wheel.
  3. To install, reverse removal procedure. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS . Activate air bag system.
scientia non olet · About LEMON Manuals