Test D: Driver's Information Center Switches Inoperative
- If IPC diagnostic system check was performed, go to next step. If IPC diagnostic system check was not performed, go to INSTRUMENT PANEL CLUSTER DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. After performing IPC diagnostic system check, go to next step.
- Replace driver's information center switch panel. See DRIVER INFORMATION CENTER & HEAD-UP DISPLAY CONTROL SWITCHES under REMOVAL & INSTALLATION. After repairs, go to next step.
- Replace IPC. See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION. After repairs, go to next step.
- Recheck system operation to verify the repair. If system operates properly, repair is complete. If system does not operate properly, go to step 2 .