Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oil level indicator tube seal (2). See Figure.
- Install the oil level indicator tube (3).
- Clip the electrical wiring harness to the oil level indicator tube.
- Install the oil level indicator tube bolt (1).
Tighten
Tighten the oil level indicator tube bolt to 10 N.m (89 lb in).
- Install the air cleaner outlet resonator.