LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine Mechanical - 2.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Inspection

Engine Mount Inspection

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Important:  It is the design intent of the torque axis mounting systems to allow more engine movement than other mounting systems. Do not replace any torque axis mounts for excessive engine movement. Replace them if damage exists on the mounts or rubber.

  1. Raise the engine enough to apply slight tension on the engine mount.
  2. Replace the engine mount if any of the following conditions exist:
    • The hard rubber surface is covered with heat cracks.
    • The rubber split through the center.
  3. Lower the engine.
  4. Verify the engine mount fastener torque. Refer to FASTENER TIGHTENING SPECIFICATIONS .
scientia non olet · About LEMON Manuals