LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine Mechanical - 2.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the drive belt tensioner counterclockwise to release the spring tension. See Figure.
  2. Install the drive belt.
  3. Position the fender liner to the front fender. Install the push-in retainers. Install the screws from the fender liner to the fender. Tighten the screws to 2 N.m (18 lb in). Install the screws to the front fender liner to the front bumper fascia. Tighten the screws to 2 N.m (18 lb in).
    4. CAUTION: Tighten wheel lug nuts evenly and alternately in order to avoid excessive runout.
  4. Install the tire and wheel assembly. Tighten wheel lug nuts in a criss-cross pattern to 140 N.m (100 lb ft).
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals