LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine Mechanical - 2.2L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine drive belt. Refer to Drive Belt Replacement .
  2. Use J 38122-A  to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
    3. Fig 1: Installing Crankshaft Balancer Holder
    G01580450Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft balancer bolt. Discard the bolt.
  4. Remove the crankshaft balancer.
    Fig 2: Removing/Installing Crankshaft Balancer
    G01580451Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals