LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Automatic Transmission Servicing) >> Removal & Installation >> Shift Control Cable Replacement - Floor Shift >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure

    in Engine Electrical.

  2. Disconnect the automatic transmission cable from the selector lever.
    Fig 1: Identifying Automatic Transmission Cable & Selector Lever
    GM893831Courtesy of GENERAL MOTORS CORP.
  3. Remove the range select lever cable from the cable bracket.
    Fig 2: View Of Range Select Lever Cable
    GM104478Courtesy of GENERAL MOTORS CORP.
  4. Remove the front floor console. Refer to Console Replacement - Front Floor in Body - Instrument Panel and Console
  5. Remove the range select lever cable from the automatic transmission control.
    Fig 3: View Of Range Select Lever Cable
    GM104480Courtesy of GENERAL MOTORS CORP.
  6. Remove the cable grommet at the cowl.
  7. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals