LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Automatic Transmission Servicing) >> Removal & Installation >> Park/Neutral Position Switch >> Removal (First Design)

Removal (First Design)

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake and place the control assembly in Neutral. The transaxle manual shaft must be in the Neutral position prior to installing the range switch.
  2. Remove the shift control cable from the transaxle range switch lever.
  3. Disconnect the electrical connectors from the transaxle range switch.
  4. Remove the transaxle range switch lever nut and lever. See Fig 1.
  5. Remove the transaxle range switch bolts and remove the switch.
Fig 1: Removing & Installing PNP Switch
G00082503Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals