LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Automatic Transmission Servicing) >> Removal & Installation >> Park/Neutral Position Switch >> Installation (First Design - New Switch)

Installation (First Design - New Switch)

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the transaxle manual shaft is in the Neutral position.
  2. Align the flats on the transaxle shift shaft with the flats on the transaxle range switch and install the switch.
  3. Tighten the transaxle range switch bolts.
  4. Install the transaxle range switch lever and nut. Tighten the transaxle range switch lever retaining nut to specification. See TORQUE SPECIFICATIONS .
  5. Install the shift control cable to transaxle range switch lever and verify proper operation.
scientia non olet · About LEMON Manuals